- Effect of Sintering Temperature on Microstructure and Mechanical Properties for the Spark Plasma Sintered Titanium from CP-Ti Powders
-
Kyeong-Sik Cho, In-Beom Song, Min-Hyeok Jang, Ji-Hye Yoon, Myung-Hoon Oh, Jae-Keun Hong, Nho-Kwang Park
-
J Korean Powder Metall Inst. 2010;17(5):365-372.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.5.365
-
-
25
View
-
1
Download
-
7
Citations
-
 Abstract
 PDF
- The evolution of sinterability, microstructure and mechanical properties for the spark plasma sintered(SPS) Ti from commercial pure titanium(CP-Ti) was studied. The densification of titanium with 200 mesh and 400 mesh pass powder was achieved by SPS at 750sim1100°C under 10 MPa pressure and the flowing H_2+Ar mixed gas atmosphere. The microstructure of Ti sintered up to 800°C consisted of equiaxed grains. In contrast, the growth of large elongated grains was shown in sintered bodies at 900°C with the 400 mesh pass powder and the lamella grains microstructure had been developed by increasing sintering temperature. The Vickers hardness of 240~270 HV and biaxial strength of 320~340 MPa were found for the specimen prepared at 950°C.
-
Citations
Citations to this article as recorded by  - Sintering pressure effect on the performances of near-zero thermal expansion xLFCS/Cu metal matrix composites
Chang Zhou, Hong Zhong, Hao Lu, Xuelu Pang, Congfa Zhang, Haowu Wang, Qiang Cong, Yuzhu Song, Naike Shi, Jiong Zhao, Xiangxu Meng, Jun Chen
Ceramics International.2023; 49(17): 27958. CrossRef - Spark plasma sintered Al-0.5 wt% MWCNT nanocomposite: Effect of sintering pressure on the densification behavior and multi-scale mechanical properties
Lavish K. Singh, Alok Bhadauria, Akash Oraon, Tapas Laha
Diamond and Related Materials.2019; 91: 144. CrossRef - Manufacturing and Properties of CGI-based Composite Coating Layer Utilizing a Warm Spray Process and Cu-Ga and Cu-In Mixed Powders
Min-Gwang Jeon, Myeong-Ju Lee, Hyeong-Jun Kim, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2014; 21(3): 229. CrossRef - Effect of particle size distribution on microstructure and mechanical properties of spark-plasma-sintered titanium from CP-Ti powders
Je Ha Shon, In-Beom Song, Kyeong-Sik Cho, Yong-il Park, Jae-Keun Hong, Nho-Kwang Park, Myung-Hoon Oh
International Journal of Precision Engineering and Manufacturing.2014; 15(4): 643. CrossRef - Effects of various sintering methods on microstructure and mechanical properties of CP-Ti powder consolidations
Je-ha SHON, Jong-moon PARK, Kyeong-sik CHO, Jae-keun HONG, Nho-kwang PARK, Myung-hoon OH
Transactions of Nonferrous Metals Society of China.2014; 24: s59. CrossRef - Sintering and Rolling Behavior of Cu-50In-13Ga Ternary Alloy Powder for Sputtering Target
Dae-Won Kim, Yong-Ho Kim, Jung-Han Kim, Dae-Guen Kim, Jong-Hyeon Lee, Kwang-Bo Choi, Hyeon-Taek Son
Journal of Korean Powder Metallurgy Institute.2012; 19(4): 264. CrossRef - Effect of Heat Treatment Environment on the Properties of Cold Sprayed Cu-15 at.%Ga Coating Material for Sputtering Target
Byung-Chul Choi, Dong-Yong Park, Hyung-Jun Kim, Ik-Hyun Oh, Kee-Ahn Lee
Journal of Korean Powder Metallurgy Institute.2011; 18(6): 552. CrossRef
|
kpmi
